The New AutoTRAX Users Forum

Forum Navigation
You need to log in to create posts and topics.

Veroboard

Thinking of adding support for Veroboard design.

This will include manual routing. 

The copper is on the bottom side but for design purposes it is shown as if it is on the top.

There is also a cut 'track' to the right of the top of the resistor.

I will also add track/node highlighting.

Will only work for TPH devices with a 0.1" pitch. (Old school) although I believe adaptor boards are available.

3D as well.

The developer of AutoTRAX DEX PCB designer

 

The developer of AutoTRAX DEX PCB designer

It might be possible to have 2 associated PCBs in a design.

  1. Regular PCB
  2. Veroboard
The developer of AutoTRAX DEX PCB designer

It appears there is very little interest so I'll put this on ice.

The developer of AutoTRAX DEX PCB designer

I would have found it very useful about 8 weeks ago!

but typically I design vero layouts in situ by building.

This case I needed to accurately communicate the build to others (without meeting them). DEX worked fine to do this.

I actually had cuts in the tracks, not sure why they haven't displayed in the image.

 

Uploaded files:
  • Thermal-Camera-Reference-underside.png
  • Thermal-Camera-Reference-3D-frontleft.png

I find that a large area of veroboard on the screen gives a optical effects. (full screen)

View the attached file.

Uploaded files:
  • vero.png
The developer of AutoTRAX DEX PCB designer